Also

How to make a shower in the country with your own hands: manufacturing technology

How to make a shower in the country with your own hands: manufacturing technology



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Dacha is not only a place for recreation, but also for growing various vegetables, berries, fruits. It will not be difficult to make it if you think and plan everything in advance.

Content:

  • Outdoor shower: types and their description
  • Choosing a place for a summer shower
  • Materials and tools for work
  • Step-by-step instruction

Outdoor shower: types and their description

A shower in the country allows you to improve comfort conditions without high costs. With the correct construction of the structure, you can use the shower at any time of the year. There are several types of souls, which differ in the complexity of the structure. A simple outdoor shower is usually located at the back of the site. For its construction, you will need four wooden, metal or plastic supports. For the side wall, use an opaque film.

The shower tank is made from a bucket, which is installed on a special support. Next, the end of the hose is installed into the water supply, and the other into the tank. Then a watering can is attached, and the tap together with the pedal is connected with a rope. This is the easiest way to make a summer shower.

You can purchase a ready-made shower, its cost depends on the quality of the panels, the volume of the cabin, as well as the availability of additional systems. It is convenient to disassemble and store such a shower in winter. A wooden shower cubicle is the most popular design for a summer shower. With the help of wooden elements, you can create a booth of any shape, following the drawing. You can make the capital structure of the soul. For construction, bricks, concrete blocks, gas blocks or stones are used.

Choosing a place for a summer shower

When building a shower in the country, you must be guided by the following principles:

  • Profitability
  • Environmental friendliness
  • Practicality
  • Hygienic
  • Aesthetics

It is necessary to place the shower so that the structure does not spoil the landscape design. It is important that the shower is used not only in hot weather, but also in any weather. It should be borne in mind that the water runoff does not harm the environment. It is also necessary to think over the heating and water supply system, the location of the structure, and only then proceed with the construction of the shower.

The place for the installation of the structure should be chosen sunny, well warmed up. If you place the shower stall in the shade, then the water will be cold or slightly warm. If the purpose of the shower is to rinse after the pool, then the cabin should be placed near the pool.

Materials and tools for work

Before doing a shower in a suburban area, you need to prepare tools and materials. For work you will need:

  • Level
  • Corner
  • Roulette
  • Hammer
  • Nails
  • Twine

From materials, you should purchase a tank, faucet, divider, wooden boards or plastic sheets. To fill the foundation, sand, cement and concrete are needed. The structure must be able to support the weight of the tank, so the beams should be 100x100 mm. A wooden booth will last longer if the material is pre-impregnated with water-repellent materials. To sheathe the frame, you can use the following materials: moisture-resistant plywood, slate, lining, fiberboard, siding, etc.

You can buy a water tank at a store or use an old tank that is not needed on the farm. It is important to consider size and weight when doing this. It should be taken into account that the shower tank is evenly distributed on the supporting structure. One family member will need about 40 liters of water, taking this into account, the volume of the tank is selected. For the final finishing you will need: paint, plaster, clothes hooks, a small shelf for detergents and a rubber floor mat.

Step-by-step instruction

The construction of a shower on a suburban area consists of several stages. Preparation of the base. Depending on the chosen structure, the preparation of the site for construction will differ. When constructing a temporary structure, only the top layer of soil (10-15 cm) should be removed, and then leveled and covered with sand.

Video on how to make a shower in the country with your own hands:

If you plan to build a capital shower, then you need to dig a hole about 30 cm deep.However, it should be remembered that the depth is determined by the material that will be used to lay the foundation. At the site of the future structure, you need to hammer in the pegs and pull the cord around the perimeter. Next, you should prepare a place for the pipes and then pour the concrete solution. It is important that the ends of the pipes protrude on the surface by about 25-30 cm.

Drain pit design. The drain must be placed a few meters away from the shower. It is not recommended to make a drain hole under the booth or against the walls. Subsequently, this can lead to the destruction of the foundation, as well as the appearance of unwanted odors. The drain should be laid with roofing material, PVC film or concrete screed, which is subsequently reinforced with a mesh.

Booth design. The optimal size of the structure: length and width about 89.5 cm, height to the watering can about 190 cm, and the average height of the booth is 260 cm. Installation of the frame is carried out as follows:

  1. First, the markup is done. To do this, mark a rectangle on the ground. Then set the bars according to the marking, then fasten them with bolts and connect the bars-walls of the future cabin.
  2. At the next stage, the walls are erected. Next, carry out the piping. The hose pipe should be above the head.
  3. At the final stage, install the tank. The finished tanks have a built-in valve system. If the tank is made on its own, then make a threaded branch, put a tap with a removed hose. In this case, the water level should be monitored. If the tank is overfilled, water will flow from the hose. In this case, the water must be shut off.

If desired, the walls can be plastered or sheathed with siding. Moisture-resistant materials should be chosen. In order to maintain a uniform style in the design of a country house or summer cottage, it is recommended to sheathe the structure of a summer shower with the same materials that were used in the construction of adjacent buildings.

Special skills for building a shower in the country are not required. If the shower will be used only in the summer to wash, then it is enough to make a simple structure. If it is planned to visit the shower cabin in winter, then it is already necessary to construct a capital structure, where it will be necessary to buy a heating system.


Watch the video: Great Production Process At The Factory! Modern Working Machine! Interesting Production Technology#3 (August 2022).